Damper High Performance Street
High Performance Street Dampers are made from extremely tough modular iron. Suitable for all street applications & can be revved as high as 6500rpm. These dampers are of the highest quality & are precision machined to tighter tolerances than OEM. They come with a gloss black paint finish & white timing marks for easier reading. Externally balanced dampers feature bolt-in counterweights that are precision balanced. All Ford Dampers have three sets of timing marks to cover nearly every small block application. Ford Dampers have both 3 & 4 bolt accessory bolt patterns.
| Part No | Application | Size |
| PRO-80000 | SB Chev (Int) | 6 3/4” |
| PRO-80001 | SB Chev 400 (Ex) | 6 3/4” |
| PRO-80002 | SB Chev 350 (Int) | 8” |
| PRO-80003 | SB Chev 400 (Ex) | 8” |
| PRO-80004 | BB Chev 396-427 (Int) | 8” |
| PRO-80005 | BB Chev 454 (Ex) | 8” |
| PRO-80006 | SB Ford Early (28.4oz.in.) | 6.4” |
| PRO-80007 | SB Ford 1981 Up (50oz.in.) | 6.4” |
| PRO-81006 | Spacer SB Ford to 1979 351W | - |
| PRO-81007 | Spacer SB Ford 1980 & Later | - |
Damper High Performance Race
High Performance Race Dampers are made from bulletproof 1045 steel. Can be revved to over 10,000rpm. Optimum damping occurs in 6500-7500rpm range. The machine work on these dampers is second to none & the critical fit tolerances & balance are held more closely than OEM. All externally balanced dampers have bolt-in counterweights. This feature allows for swapping weights between dampers (Ford) or adding them to internally balanced dampers (Chevy) if you change applications. You cannot buy a more accurately balanced harmonic damper than these.
| Part No | Application | Size |
| PRO-90000 | 350 Chev (Int) | 6 3/4” |
| PRO-90001 | SB Chev 400 (Ex) | 6 3/4” |
| PRO-90002 | 350 Chev (Int) | 8” |
| PRO-90003 | 400 Chev (Ex) | 8” |
| PRO-90004 | 396-427 Chev (Int) | 8” |
| PRO-90005 | 454-502 Chev (Ex) | 8” |
| PRO-90006 | Early Ford SB (28.4oz.in.) | 6.4” |
| PRO-90007 | 81 Up 5.0L Ford (50oz.in.) | 6.4” |
| PRO-81006 | Spacer SB Ford to 1979 351W | - |
| PRO-81007 | Spacer SB Ford 1980 & Later | - |
Damper SB Chevy Superlight
The new Powerforce Superlight Damper for Small Block Chev weighs only 6.4lb & features a .75” wide inertia ring. Made of 1045 steel, the lightweight damper is of fully bonded construction with timing marks every 90°, as well as 60° of initial timing marks. This damper is primarily intended for racing applications where light rotating weight is desired with nominal damping. 10,000rpm recommended limit.
This is not an SFI-spec harmonic damper.
| Part No | Application |
| PRO-80010 | SB Chevy 350 Superlight 6.4lbs |
Balance Spacer
| Part No | Application |
| PRO-81006 | Harmonic Damper Spacer for Ford early to 79 .350" thick |
| PRO-81007 | Harmonic Damper Spacer for Ford 80 up .950" thick |
| PRO-81008 | Harmonic Damper Spacer for Ford .875" thick |
SB Chevy Stud Girdle Kits
Precision cast aluminium bars. 23% lighter than solid bars, yet 20% stiffer due to their unique “I” Beam design. Includes adjuster nuts.
| Part No | Application | Size |
| PRO-12375 | SB Chevy V8 Stud Girdle Kit | 3/8” |
| PRO-12437 | SB Chevy V8 Stud Girdle Kit | 7/16” |
| PRO-12381 | Replacement Adjuster Nuts | 3/8” |
| PRO-12382 | Replacement Adjuster Nuts | 7/16” |
NA
| Part No | Application |
| PRO-91003 | Counterweight for SB Chev 400 |
| PRO-91005 | Counterweight for BB Chev 454 |
| PRO-91006 | Counterweight for Early SB Ford |
| PRO-91007 | Counterweight for Late SB Ford |
NA
| Part No | Application |
| MANIFOLD SERVICE ITEMS | |
| PRO-52110 | Adapter Bushings Set of 4 To Fit Late Model 1987-95 Heads |
| PRO-52111 | Adapter Plate & Gasket To Adapt Square Bore Carb to Spread Bore Manifold |
| PRO-52112 | Manifold Bushings Straight (set 4) |
| PRO-52115 | EGR Adaptor (for 52008/52009) |
| PRO-52125 | Throttle, Cruise Control & Transmission KD Bracket Assy. Stainless Steel |
| PRO-52126 | PRO-52111 Throttle, Cruise Control & Transmission KD Bracket Assy. Steel |
| PRO-52210 | Water Divider Baffle For 52030/52031 |
| PRO-54100 | Phenolic Spacer 1/2" for 54126/54127 Manifold |
| PRO-54151 | Elbow Adapter for 94/95 Mustang |
| PRO-54152 | EGR Adaptor for 94/95 Mustang |
| PRO-54160 | Gasket Set for 54124/54125 Viper Plenum |